Description
The 1U to 3U adapter allows you to install up to three 6equencer 1U modules in a 3U rack.
The adapter consists of two rails that can be mounted between 1U modules using M3 bolts. Combining three 1U modules with this adapter, results in a total height of 3U.
In combination with a 1U + 3U case, this allows you to mount up to four 6equencers on top of each other. The 6equencers can of course be linked using the link connection on the back, resulting in patterns of up to 64 steps. Combined with the Link Patchbay, the 6equencer link can be modified on the fly.
It is of course also possible to combine 6equencers with other 1U modules.
Width: 24HP
Material: SLA, black, sanded
The adapter is open source hardware and was designed by mmalex, the creator of Plinkysynth. Thank you!
Manufacturer:
Tubbutec GmbH, Storkowerstr. 115A, 10407 Berlin, Germany
supportⒶtubbutec.de (replace Ⓐ with @)
Product safety
Manufacturer information
Manufacturer:
Tubbutec GmbH, Storkowerstr. 115A, 10407 Berlin, Germany
supportⒶtubbutec.de (replace Ⓐ with @)
Product safety documents
Safety instructions
Product Safety Information
Eurorack Module
Important Safety Information
This Eurorack module is designed for use within standard Eurorack synthesizer systems and is intended for adult users familiar with modular synthesis and electronic equipment. Please read this safety guide before installation or use.
General Warnings
- Electrical Hazards:
- Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
- Never connect or disconnect the module while the Eurorack system is powered on.
- Heat Generation:
- The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
- Sharp Edges:
- The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
- Small Parts:
- Contains small parts that could pose a choking hazard. Keep away from children and pets.
- Compatibility:
- This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Installation and Use
- Mounting: Secure the module properly in the Eurorack case using the provided screws.
- Power Connection: Verify the polarity of the power cable before connecting to avoid damage to the module or power supply. Use only the included or manufacturer-recommended power cable.
- Operational Use: Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Maintenance and Handling
- Inspection: Regularly check for loose connections or signs of wear.
- Cleaning: Disconnect the module from power before cleaning. Use a dry or lightly damp cloth; avoid using solvents or water directly on the module.
- Repairs: Do not attempt to repair or modify the module yourself. Contact the manufacturer for support.
Environmental Safety
- Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
- The manufacturer is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
