µTune midi gate and 0 coast

frontpage Forums Product questions and support µTune µTune midi gate and 0 coast

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #8989
    tubbutec
    Keymaster

    ketem13 wrote:
    sending midi gate from the gate output.

    so I got an 0 coast which has a midi input.

    I try to send midi gate from the gate out of the utune to the midi in of the 0 coast and then the gate out of the 0 coast to trigger some envelope but nothing is happening.

    any helps with the above ?

    Thanks
    Hi,

    midi gate does not output any midi information. It outputs a gate signal when µTune receives a midi note on/note off massage.
    If you want to connect midi out from µTune to the 0 coast, you can use the din-midi output with an adapter to 3.5mm jack
    Or you use the µTune gate-out to trigger the 0 coast with its gate input

    #8990
    Anonymous

    tubbutec wrote:
    ketem13 wrote:
    sending midi gate from the gate output.

    so I got an 0 coast which has a midi input.

    I try to send midi gate from the gate out of the utune to the midi in of the 0 coast and then the gate out of the 0 coast to trigger some envelope but nothing is happening.

    any helps with the above ?

    Thanks
    Hi,

    midi gate does not output any midi information. It outputs a gate signal when µTune receives a midi note on/note off massage.
    If you want to connect midi out from µTune to the 0 coast, you can use the din-midi output with an adapter to 3.5mm jack
    Or you use the µTune gate-out to trigger the 0 coast with its gate input
    will it output a gate signal also when receiving signal to the cv input of utune ?

    #8991
    tubbutec
    Keymaster

    ketem13 wrote:
    tubbutec wrote:
    ketem13 wrote:
    sending midi gate from the gate output.

    so I got an 0 coast which has a midi input.

    I try to send midi gate from the gate out of the utune to the midi in of the 0 coast and then the gate out of the 0 coast to trigger some envelope but nothing is happening.

    any helps with the above ?

    Thanks
    Hi,

    midi gate does not output any midi information. It outputs a gate signal when µTune receives a midi note on/note off massage.
    If you want to connect midi out from µTune to the 0 coast, you can use the din-midi output with an adapter to 3.5mm jack
    Or you use the µTune gate-out to trigger the 0 coast with its gate input
    will it output a gate signal also when receiving signal to the cv input of utune ?
    In the beta version there is a function called ‘auto-trigger’ which does that

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.