Roland CR-800

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #8626
    Anonymous

    Hi, I have a Roland CR-800 and I was wondering if the Uni-Pulse midi kit for the CR-78 would work on this machine as well ?

    Any help would be greatly appreciated.

    Thanks
    https://encyclotronic.com/drum-machines … r-800-r72/

    #8627
    tubbutec
    Keymaster

    You will definitely be able to trigger sounds. However without schematics it is hard to say from here. A synth tech would definitively be able to find the trigger points and install uniPulse.
    Quite likely the CR-800 uses the same sound board as the CR-68. If you can post some pictures of the board inside, I can probably help better.

    #8628
    Anonymous

    Here is a few pics

    #8629
    tubbutec
    Keymaster

    I believe this is in fact the Cr-78 voice board. You can compare it to the pictures on page 6 and 7 in out installation manual:
    https://tubbutec.de/files/uniPulseConfi … lation.pdf

    You should be able to connect uniPulse at the very same points and trigger the sounds.

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.