Pitchbend Modypoly

frontpage Forums Product questions and support ModyPoly Pitchbend Modypoly

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #9256

    I created this topic so we won’t mix the previous questions (Eko Rhythmaker and UniPulse)

    So I have done the pitchbend mod on the Polysix and I don’t know why but it doesn’t work.

    I use 33K + 66K (2x33K) on the red wire and now the polysix is out of tune (meaning the C has became A) which is not a problem since you can calibrate the pitchbend.

    Unfortunately the pitch bend CC command is not working (there is no point of doing the pitchbend cal. then)
    I can still send midi note on off or change the filter with the CC17 command. I have checked the continuity between the resistors so the soldered joints are ok.

    I guess it is not a midi issue from my side, right?

    I have a modysix number #0068 and I have upgraded the firmware with your soft (fw 1.55).

    What did i do wrong?

    Oh and I have tested the pitchbend mod using the CC21 & CC22 commands hooked with the brown wire and the reso mod as well by the way but same results.



Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.