so just to be clear:
You can sync your 101 via the internal clock / external clock input.
But you can not sync it to midi clock. Correct?
Please make sure:
– Arp/Seq clock source is set to ‘midi clock’
– You are actually sending a midi clock to the 101 (in some DAWs like Abelton or FLStudio the clock needs to be activated)
– After you cahnge the settings you need to press stop/start on your DAW as the 101 need a start signal to begin sequencing.
There are two clock dividers: one for midi clock (1/16, 1/8,…) and one for the internal/external clock. The latter can divide a clock signal by 1,2,3…. the default here is 1